|
»
Data Sheet
» FAQ
»
Downloads |
24-port Gigabit L2/L4 Managed Switch is a standard switch that
meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet
specifications. The switch included 8-Port 10/100/1000Mbps UTP
and 16-Port Gigabit SFP Fiber management Ethernet switch with wise speed
performance at full duplex load - 48 Gigabits total. The
switch can be managed through RS-232 serial port via directly
connection, or through Ethernet port using CLI or Web-based
management unit, associated with SNMP agent. With the SNMP
agent, the network administrator can login the switch to
monitor, configure and control each port's activity in a
friendly way. The overall network management is enhanced and
the network efficiency is also improved to accommodate high
bandwidth applications. In addition, the switch features
comprehensive and useful function such as Port-base VLAN, IEEE802.1q tag-base VLAN
with up to 256 active VLANs, 802.1D & 802.1w STP and RSTP, VSM (Virtual Stacking
Management),QoS (Quality of Service), Port Trunking, Bandwidth
Control, Port Security, SNMP/RMON, IGMP Snooping capability
and Illegal Access Report via the intelligent software. It is
suitable for both metro-LAN and office application.
Key Features
QoS support layer 4 classification
The switch supports not only Layer 2 802.1p Priority Queue
control, but also supports programmable higher layer
classification and prioritization to enable enhanced Quality
of Service (QoS) support for real time applications base on
information taken from Layer 2 to Layer 4, such as VoIP.
Port Mirroring Helps Supervisor Monitoring Network
Port mirroring copies traffic from a specific port to a target
port. This mechanism helps track network errors or abnormal
packet transmission without interrupting the flow of data.
Q-in-Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both
security and performance. VLAN is used to isolate traffic
between different users and thus provides better security.
Limiting the broadcast traffic to within the same VLAN
broadcast domain also enhances performance. VLAN support
enabling advanced techniques such as "802.1Q-in-1Q" to be
deployed.
802.3ad LACP for Bandwidth Aggregation
The Gigabit ports can be combined together to create a
multi-link load-sharing trunk. Up to 12 Gigabit ports can be
set up per trunk for bandwidth up to 24Gbps, all traffic is
aggregated based on MAC addresses, thus balancing the traffic
load. The switch supports up to 8 trunking groups. Port trunks
are useful for switch-to-switch cascading, providing very high
full-duplex speeds.
802.1x Access Control Improve Network Security
802.1x features enable user authentication for each network
access attempt. Port security features allow you to limit the
number of MAC addresses per port in order to control the
number of stations for each port. Static MAC addresses can be
defined for each port to ensure only registered machines are
allowed to access. By enabling both of these features, you can
establish an access mechanism based on user and machine
identities, as well as control the number of access stations.
802.1d Compatible & 802.1w Rapid Spanning Tree
For mission critical environments with multiple switches
supporting STP, you can configure the switches with a
redundant backup bridge path, so transmission and reception of
packets can be guaranteed in event of any fail-over switch on
the network.
Broadcast/Multicast Storm Control
To limit too many broadcast/multicast flooding in the network,
broadcast/multicast storm control is used to restrict excess
traffic. Threshold values are available to control the rate
limit for each port. Packets are discarded if the count
exceeds the configured upper threshold.
Standard compliance
- IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
- IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
- IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)
- IEEE 802.3z 1000Base-SX/LX Ethernet
- IEEE 802.3x flow control capability
- ANSI/IEEE 802.3 auto-negotiation
- IEEE 802.1q VLAN
Performance
Switching capacity
- 24 Gigabit Ethernet ports with non-blocking wise speed
performance at full duplex load - 48 Gigabits total
- 8 K MAC addresses
- 400KB on-chip frame buffer.
- Supports Jumbo frame support, up to 9K
- Broadcast/Multicast Storm Suppression
- Port Mirroring
VSM (Virtual Stacking Management)
- Supports 16 devices stacking
- Multiple switches can be managed via one IP address, just
like software stacking
- Low cost and easily to establish network environment, not
extra hardware require.
- Not center on the physical location of wiring closets
VLAN
- Port-base VLAN
- IEEE802.1q tag-base VLAN, up to 4096 active VLANs
- Q-in-Q is an efficient method for enabling Subscriber
Aggregation
Qos
- Supports Layer 4 TCP/UDP Port and ToS Classification
- Supports 802.1p QoS with two level priority queue
- Supports priority in a Q-in-Q tag
- Bandwidth Control
- Supports Ingress, Non-unicast and Egress Bandwidth rating
management with a resolution of 1Mbps
Protocol
LACP
- Port trunking with 8 trunking group
- Up to 12 ports for each group.
GVRP/GARP
Multicasting
- Supports IGMP snooping including active and passive mode
STP/RSTP
Network Security
- 802.1x access control
- Management Access Policy Control
Snmpv1,v2c Network Management
MIB Files: Interface MIB, Address Translation MIB, Statistics
Group 1, History Group 2, Alarm Group 3, Event Group 9, IP MIB,
ICMP MIB, TCP MIB, UDP MIB, SNMP MIB, FC 1213 MIB (MIB-II),
RFC 1757 RMON MIB, RFC 1493 Bridge MIB, RFC 1643 Ethernet MIB,
Enterprise MIB |
| Кошница |
| Бр. |
0 |
| Обща стойност($) |
0.00 |
» Профил
» Кошница
» Проформа
» Buy $650.00
|