correct EEPROM mounting

» RTL8309SB Data Sheet
» FAQ
» Downloads

• Programmable EEPROM support for storing switch configuration and exploring extended switch features
• Port-based VLAN Grouping of ports – 8 VLAN Groups
• QoS function based on:

• Port-based priority
• 802.1p VLAN tag
• DiffServ/TOS field in TCP/IP header
• IP address
• Supports two-level priority queues with various weighting ratios
• Queue service rate based on weighted round robin algorithm
• Optional auto turn off Flow Control for 1~2 sec to avoid head-of-line blocking

• Flexible 802.1Q port/tag-based VLAN:

• Supports 9 VLAN Indexes (Groups)
• Port VLAN Ids: 1-4095
• Optional 802.1Q tag-VID aware function
• Optional VLAN Ingress Tag Admit
• Optional VLAN Ingress Member set
• Optional ARP VLAN for broadcast packet
• Optional Leaky VLAN for unicast packet

• IEEE 802.1P/Q tag insertion or removal on per-port basis (egress):

• Do not change packets (Default)
• Insert input port’s PVID for non-tagged packets. Do not change packets if they are already tagged
• Remove VLAN tags from tagged packets. Do not change packets if they are not tagged
• Remove VLAN tags from tagged packets then insert the input port’s PVID. For non-tagged packets, insert the input port’s PVID

• Selectable “Fast aging” (800uS) or “Normal aging” (300s) of MAC table entries
• Аll other functions embedded in RTL8309SB chipset

• 8 port 10/100 Mbps
• up-link expansion port
• 20/200 Mbps (full duplex) maximum speed
• Store-and-forward technology
• dynamic memory allocation
• Supports 802.3x full-duplex and back pressure half-duplex flow control
• MAC self- learning
• optional steel mini-case
• RTL-Chipset
• very low power consumption

Dimensions: 140x78x28 mm

• Stand-by (no UTP connected): 0.45W
• Max Consummation: 2.5W
• UTP-connected: 0.25W per 100Mbps-port

» Профил
» Кошница
» Проформа
» Buy $11.00